Enable the Auto-Config function or not. While enabled, bridge will try to retrieve
the Master and all connected EP config files from the designated Auto-Config
directory 'eocBrAutoConfigTFTPExtensionPath' at server
'eocBrAutoConfigTFTPServer' via TFTP. Usually the 'Extension Path'
and 'TFTP Server IP Address' are obtained during the DHCP client handshaking.
For example, power on the bridge, it will start DHCP client and get the
Auto-Config TFTP related parameters. If the Auto-Config is ON,
bridge then begins to retrieve the config files of Master/EP.
Setup Master/EP devices accordingly.