lpDS3DS1ChanTimeslotDataRate 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.2

This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.