atmIfCAUbrPerVcQueueLimitReferenceRate 1.3.6.1.4.1.562.2.4.1.114.3.6.100.1.14

This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the UBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 3685 for low speed cards such as DS1, E1 and IMA, set to 14740 for high speed cards such as JT2, DS3, E3 and OC3, and set to 65511 for high speed ATM IP cards such as 3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2 and 2pOC3MmAtm2. On CQC-based ATM cards, this attribute must be set to the same value for CA NrtVbr, Abr and Ubr components. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )