ctPriClassifyRowStatus
1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.6
This object provides both control and status for the
associated conceptual row in the table. Rows can be
created in two ways.
createAndGo - The specified row will be created and
activated if the instance is allowable. If not, an
inconsistentValue exception will be returned and the
row will not be created. This provides the most
optimal method of creating an active row, but provides
the user no explanation if the row cannot be created.
createAndWait - The specified row will be created and put
in the notInService state if the instance is allowable.
A subsequent activation of this row will bring it into
the active state. If the instance is not allowable,
the row will be created and put in the notReady state.
A subsequent activation of this row will fail. Since
the inappropriate information is always contained in the
indexing leaves, activation will never succeed and the
row should be removed by the management station. When
a row is in the notReady state, the ctPriClassifyRowInfo
may be retrieved to obtain a plain English explanation
of why this row cannot be activated. createAndWait is
the preferred method for this reason.
Both methods described above leave ctPriClassifyIngressList
in it's default state, requiring an additional set operation
in order to modify it. An even more optimal twist on the
createAndWait method is to set the ctPriClassifyIngressList
to it's desired value as a method for row creation. This
will essentially cause an implicit createAndWait since it
too will leave the row in either the notInService or
notReady state. This leaves only activation or error
analysis as the last step.
Any rows left in the notReady or notInService state for
more than 5 minutes should be automatically removed by
the agent implementation.