An ASCII string containing the 64 flags representing
the current active UPS specific faults for the Smart-UPS
UPS models. If the Network Card is unable to determine
the values of the flags, this variable is set to
'UNKNOWN'. If the connected UPS does not use this
variable, it is set to 'NOT SUPPORTED'.
The flags are numbered from 1 to 64, and read from left
to right. The bits are defined as follows:
Flag 1: EPO Switch Activated
Flag 2: Static Bypass Switch Fault
Flag 3: System Configuration Fault
Flag 4: Power Supply Unit Fault
Flag 5: Weak Battery
Flag 6: High Battery Temperature
Flag 7: Internal Mechanical Bypass
Flag 8: Loss Of Parallel Redundancy
Flag 9: Parallel Bus Communication Fault on Cable 1
Flag 10: Parallel Bus Communication Fault on Cable 2
Flag 11: Auxiliary Bus Communication Fault
Flag 12: Parallel Bus Termination Fault on Cable 1
Flag 13: Parallel Bus Termination Fault on Cable 2
Flag 14: Auxiliary Bus Termination Fault
Flag 15: No Master Present In The Parallel System
Flag 16: Overload on a Parallel Unit
Flag 17: Parallel Configuration Fault
Flag 18: <Not Used>
Flag 19: <Not Used>
Flag 20: <Not Used>
Flag 21: <Not Used>
Flag 22: <Not Used>
Flag 23: <Not Used>
Flag 24: <Not Used>
Flag 25: <Not Used>
Flag 26: <Not Used>
Flag 27: <Not Used>
Flag 28: <Not Used>
Flag 29: <Not Used>
Flag 30: <Not Used>
Flag 31: <Not Used>
Flag 32: <Not Used>
Flag 33: <Not Used>
Flag 34: <Not Used>
Flag 35: <Not Used>
Flag 36: <Not Used>
Flag 37: <Not Used>
Flag 38: <Not Used>
Flag 39: <Not Used>
Flag 40: <Not Used>
Flag 41: <Not Used>
Flag 42: <Not Used>
Flag 43: <Not Used>
Flag 44: <Not Used>
Flag 45: <Not Used>
Flag 46: <Not Used>
Flag 47: <Not Used>
Flag 48: <Not Used>
Flag 49: <Not Used>
Flag 50: <Not Used>
Flag 51: <Not Used>
Flag 52: <Not Used>
Flag 53: <Not Used>
Flag 54: <Not Used>
Flag 55: <Not Used>
Flag 56: <Not Used>
Flag 57: <Not Used>
Flag 58: <Not Used>
Flag 59: <Not Used>
Flag 60: <Not Used>
Flag 61: <Not Used>
Flag 62: <Not Used>
Flag 63: <Not Used>
Flag 64: <Not Used>