firmwareUpgradeStart 1.3.6.1.4.1.2011.2.235.1.1.30.1

Start upgrade firmware, The set format is: <firmware URI>,[effect mode], with max length 256. The <firmware URI> format is: /PATH/FILE. The [effect mode] is an optional parameter. It only refers to upgrading iBMC firmware. The definition is as following and default is 2. 1: manually reboot later; 2: auto reboot after upgrade; In addition, This parameter is ignored in iBMC which is 2.36 and above. e.g.: /tmp/image.hpm,1. NOTE: 1.Do not power off the server or restart the iBMC during the firmware upgrade. 2.If the firmware fails to upgrade, check whether the iBMC's memory capacity is sufficient and the upgrade file is correct. 3.Upgrade BIOS firmware, system needs two minutes of preparation time. 4.Do not shut down or restart the OS during a BIOS upgrade. 5.If OS is power on,the BIOS upgrade file is uploaded to BMC and take effect when OS is power-off or reseted next time.