The intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net
Revisions
2006-12-13 13:30
Modifiled width of juniIsisMplsTeTunnelName from 32 to 40
2006-03-13 14:30
[Revision added by libsmi due to a LAST-UPDATED clause.]
2006-03-01 14:30
Added juniIsisSysMplsTeSpfUseAnyBestPath to juniIsisSysEntry.
Added juniIsisMplsTeTunnelTable to juniIsisSystemGroup
2006-03-01 14:30
Added juniIsisSysReferenceBandwidth and juniIsisSysHighReferenceBandwidth
to juniIsisSysEntry
2005-12-26 14:30
Default value for juniIsisSysLSPIgnoreErrors is changed from false to true.
Default value for juniIsisCircMeshGroup =1 is removed
2005-10-21 08:10
L2 Buffer Size is added and is made obsolete.
2005-03-29 14:30
Updated the SystemID TEXTUAL-CONVENTION to be inline with standard
- SystemID should now be exactly 6 bytes.
- SystemID description modified. All zeros are invalid.
2005-01-17 08:10
Updated the upper bound for Max Split Paths and removed the
L2 Buffer Size
2005-01-06 05:04
Modified the default value for the juniIsisSysSetOverloadBitStartupDuration
object. This object has a meaning only if the ISIS overload bit
is set.
2004-11-02 05:04
Updated the upper bound for Authentication Key Id in Area
Authentication, Domain Authentication, L1 Circuit and L2 Circuit
Tables.
2004-10-18 14:14
Changed the lower bound value & default value of juniIsisSysSetOverloadBitStartupDuration
from 0 to 5.
2002-09-16 21:44
Replaced Unisphere names with Juniper names.
2001-12-10 21:29
Added MPLS support.
2001-12-07 15:22
Added support for simple password protection.
2001-04-17 21:26
Add circuit state object.
2000-02-22 00:00
Initial version of this MIB module, based on draft-ietf-isis-wg-mib.