HH3C-STORM-CONSTRAIN-MIB

The Storm-Constrain function is used to avoid the packet-storm on a port. Three types of flux can be set observed respectively: broadcast, multicast and unicast. If an observed flux exceeds its upper limit, this kind of flux will be recognized as over-upper-flux. This kind of flux will be considered as normal-flux until it falls below its lower limit. If any type of observed flux is over-upper-flux, the port will change its status to controlled-status, that is to stop packet forwarding to avoid storm. Only when all the observed fluxes are not over-upper-flux, will the port return to normal(forwarding) status.

MIB content (19 objects)

1.3.6.1.4.1.25506.2.66.1 hh3cStormScalarGroup
1.3.6.1.4.1.25506.2.66.2 hh3cStormTableGroup
1.3.6.1.4.1.25506.2.66.3 hh3cStormNotifications
1.3.6.1.4.1.25506.2.66.1.1 hh3cStormTrapType
1.3.6.1.4.1.25506.2.66.1.2 hh3cStormTrapThreshold
1.3.6.1.4.1.25506.2.66.2.1 hh3cStormCtrlTable
1.3.6.1.4.1.25506.2.66.2.1.1 hh3cStormCtrlEntry
1.3.6.1.4.1.25506.2.66.2.1.1.1 hh3cStormCtrlPortStatus
1.3.6.1.4.1.25506.2.66.2.1.1.2 hh3cStormCtrlBroadcastUnit
1.3.6.1.4.1.25506.2.66.2.1.1.3 hh3cStormCtrlBroadcastUpper
1.3.6.1.4.1.25506.2.66.2.1.1.4 hh3cStormCtrlBroadcastLower
1.3.6.1.4.1.25506.2.66.2.1.1.5 hh3cStormCtrlMulticastUnit
1.3.6.1.4.1.25506.2.66.2.1.1.6 hh3cStormCtrlMulticastUpper
1.3.6.1.4.1.25506.2.66.2.1.1.7 hh3cStormCtrlMulticastLower
1.3.6.1.4.1.25506.2.66.2.1.1.8 hh3cStormCtrlUnicastUnit
1.3.6.1.4.1.25506.2.66.2.1.1.9 hh3cStormCtrlUnicastUpper
1.3.6.1.4.1.25506.2.66.2.1.1.10 hh3cStormCtrlUnicastLower
1.3.6.1.4.1.25506.2.66.2.1.1.11 hh3cStormCtrlRowStatus
1.3.6.1.4.1.25506.2.66.2.1.1.12 hh3cStormCtrlPortMode

Informations

Organization: Hangzhou H3C Tech. Co., Ltd.
Contact info: Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085

Revisions

2008-06-06 00:00: [Revision added by libsmi due to a LAST-UPDATED clause.]