CISCO-SERVICE-CONTROL-RDR-MIB
This MIB module defines objects describing statistics and configuration relating to the Raw Data Record Formatter running on a service control entity. The Raw Data Record (RDR) formatter is a component implemented by the service control entity that gathers raw data records produced by the entity and delivers them to external entities as reports. The external entities are called RDR destinations or RDR collectors. The RDR formatter can be configured to send reports to one or multiple destinations. RDR formatter can group RDRs into potentially four categories. RDR mapping to the categories is done by the client application or the user and reflects different logical destinations or purposes. For example the application may map Quota related RDRs to category 1, and Transaction related RDRs to category 2. The user can configure these categories to different destinations and assign them with different priorities. Each category has a separate queue for forwarding the RDRs and has seperate counters for gathering of statistics (sent, dropped, queued etc.). An RDR can belong to any one of the category as chosen by the user or client application. The RDR formatter supports multiple destinations identified by IP address and a port number. Each destination is assigned with a priority for each of the categories. Priority is a number in the range of 1-100, with 100 being the highest priority. The priorities are effective only when the formatter is in forwarding mode 'Redundancy' and are configured during destination configuration (while assigning the destination with categories). For example we have destination A configured with category 1 which is configured with priority 100, destination B configured with category 1 and priority 80 and destination C with category 1 and priority 90. When in redundancy mode the formatter will set the active destination for a category to be the destination with the highest priority. For category 1 the active destination will be A. If destination A goes down then the next destination selected by the formatter as active is destination C.