CISCO-APS-EXT-MIB

The Cisco APS Extension MIB extends the Cisco APS MIB in order to a) support path APS architectures and b) support interfaces other than SONET (e.g. Cisco CDL). For configuration and monitoring of APS for CDL interfaces, all objects and notifications in the Cisco APS MIB apply, with the exception of the following: - cApsStatusK1K2Rcv and cApsStatusK1K2Trans in cApsStatusEntry, - cApsConfigSdBerThreshold and cApsConfigSfBerThreshold in cApsConfigEntry, - cApsChanStatusSignalDegrades and cApsChanStatusSignalFailures in cApsChanStatusEntry, - cApsStatusFEPLFs in cApsStatusEntry, - cApsEventFEPLF. Whenever the description of an object in the Cisco APS MIB refers to a SONET LTE interface, this applies to CDL terminating interfaces as well. CDL interfaces have ifType values other than 'sonet'. For SONET path APS support, whenever the description of an object in the Cisco APS MIB refers to a SONET LTE interface, this applies to SONET PTE interfaces as well. SONET PTE interfaces have ifType values 'sonetPath'.

MIB content (38 objects)

Informations

Organization
Cisco Systems, Inc.
Contact info
Cisco Systems, Inc. Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134-1706 USA Tel: +1 800 553-NETS Email: optmgmt-dev@cisco.com

Revisions

2003-01-31 00:00
Updated the default value for the object cApsConfigSwitchoverEnableInterval.
2002-05-31 00:00
Added table cApsChanConfigExtTable which augments cApsChanConfigTable in CISCO-APS-MIB, and table cApsChanAssociationTable that provides for all protection/working channels, the associated working/protection channel IP address.
2002-05-20 00:00
Added objects for control of APS message transport and to show additional channel status information.
2001-05-21 00:00
The initial version of this MIB augments cApsConfigEntry (in the CISCO-APS-MIB) with two new APS configuration parameters, cApsConfigSpan and cApsConfigYcable, and cApsStatusEntry with two new status parameters, cApsStatusCdlApsBytesRcv and cApsStatusCdlApsBytesTrans.